QUESTION Nothing Showing up in ksEditor.

[Zach71]

Been working on this for a bit now. Working in blender, export as FBX, load into ksEditor, no errors, and more importantly, no track. Absolutely nothing shows up at all. I've tried everything i can find, i've added materials before checking, turning off fog, changing the way the road is made, adjusting where the car spawns, adding a Massive run off in order to see if i could see it that way. But nothing is changing anything.

Im spinning my wheels here, and Nothing i've read has pushed me in either direction.

Attached is a file containing a Blender file, an FBX file, a KN5 File, folder structure and the textures i'm using.

Google Drive Link : https://drive.google.com/file/d/1rkjPZGWJHMWpyvVQ1SZlRwseKqjesHmx/view

 

[Ryno917]

Does anything appear in the object or material list after importing? If so, the scale is wrong, so the track is either importing at 1% the size (too small to see) or 10000% the size (too big to see). If you're working in meters in Blender, your FBX export scale should be set to 0.01.

IIRC there's another little idiosyncrasy that can cause stuff to not import at all without an error, but I can't recall what it is at the moment. I'd check the scale first; if that's the issue, the import is actually successful but the track is just too large or too small to see in the 3d viewport in the editor.

 

[fughettaboutit]

Been working on this for a bit now. Working in blender, export as FBX, load into ksEditor, no errors, and more importantly, no track. Absolutely nothing shows up at all. I've tried everything i can find, i've added materials before checking, turning off fog, changing the way the road is made, adjusting where the car spawns, adding a Massive run off in order to see if i could see it that way. But nothing is changing anything.

Im spinning my wheels here, and Nothing i've read has pushed me in either direction.

Attached is a file containing a Blender file, an FBX file, a KN5 File, folder structure and the textures i'm using.

Google Drive Link : https://drive.google.com/file/d/1rkjPZGWJHMWpyvVQ1SZlRwseKqjesHmx/view

you have a curve as geometry, ksEditor doesnt load that, you have to apply modifiers and make a mesh, only meshes and nodes are "allowed" for AC fbx.

and btw you should use the modfier on the road, only use curve in a modifier
and curve and ROAD should have center at origin, applied all transforms

 

[fughettaboutit]

mh forget about the method shown in my pic above, it produces strange results, maybe you must change curve or something, watch tuts

 

[Zach71]

Does anything appear in the object or material list after importing? If so, the scale is wrong, so the track is either importing at 1% the size (too small to see) or 10000% the size (too big to see). If you're working in meters in Blender, your FBX export scale should be set to 0.01.

IIRC there's another little idiosyncrasy that can cause stuff to not import at all without an error, but I can't recall what it is at the moment. I'd check the scale first; if that's the issue, the import is actually successful but the track is just too large or too small to see in the 3d viewport in the editor.

That solved it, Now i just gotta do everything else. Thanks!