Smoke fx at track

[Ariel Suraniti]

I'm trying to add smoke special effect, but only when the race ends. For now I only managed to make it fixed during all the sessions. I did it with this command:

[CONDITION_...]
NAME = FLARE_FLICKERING
INPUT = ONE
FLASHING_FREQUENCY = 1
FLASHING_SMOOTHNESS = 0.9
FLASHING_SKIP_OFF_STATE = 1
FLASHING_NOISE_AMPLITUDE = 2
FLASHING_NOISE_BOUND = 10
FLASHING_NOISE_SPEED = 200
FLASHING_MIN_VALUE = 0.6
FLASHING_SYNCED = 0

[SMOKE_...]
POSITION = -44.64, 0, -219.68
DIRECTION = 0, 1, 0
SPEED = 20
SIZE = 0.1
COLOR = 255, 0, 0, 1
INTENSITY = 1
SPREAD = 8
INTENSITY = 1

[SPARKS_...]
POSITION = -44.64, 0, -219.68
DIRECTION = 0, 1, 0
SPEED = 12
LIFE = 0.3
COLOR = 255, 0, 0, 0.4
INTENSITY = 1
SPREAD_DIR = 2
SPREAD_POS = 0
INTENSITY = 0.05

[LIGHT_...]
POSITION = -44.64, 0, -219.68
DIRECTION = 0, 1, 0
CONDITION = FLARE_FLICKERING
SPOT = 0
DIFFUSE_CONCENTRATION = 1
RANGE = 12
RANGE_GRADIENT_OFFSET = 0.0
COLOR = 255, 0, 0, 0.1

Does anyone know what condition I should put so that it only activates at the end of a race, as it happens with fireworks?

thx

 

[fughettaboutit]

INPUT = FLAG_TYPE
LUT = (|0=0|12=0|13=1|14=0|15=0|16=0|)
; 13=1 Session finished
; 14=1 is one lap left

https://github.com/ac-custom-shaders-patch/acc-extension-config/wiki/Tracks-–-Conditions

It might be not working at all

 

[Johnr777]

INPUT = FLAG_TYPE
LUT = (|0=0|12=0|13=1|14=0|15=0|16=0|)
; 13=1 Session finished
; 14=1 is one lap left

https://github.com/ac-custom-shaders-patch/acc-extension-config/wiki/Tracks-–-Conditions

It might be not working at all

LUA

 

[Ariel Suraniti]

INPUT = FLAG_TYPE
LUT = (|0=0|12=0|13=1|14=0|15=0|16=0|)
; 13=1 Session finished
; 14=1 is one lap left

https://github.com/ac-custom-shaders-patch/acc-extension-config/wiki/Tracks-–-Conditions

It might be not working at all

Try this, but it doesn't work. They are active all the time...:

[CONDITION_...]
NAME = FLARE_FLICKERING
INPUT = FLAG_TYPE
LUT = (|13=1|)
FLASHING_FREQUENCY = 1
FLASHING_SMOOTHNESS = 0.9
FLASHING_SKIP_OFF_STATE = 1
FLASHING_NOISE_AMPLITUDE = 2
FLASHING_NOISE_BOUND = 10
FLASHING_NOISE_SPEED = 200
FLASHING_MIN_VALUE = 0.6
FLASHING_SYNCED = 0

 

[Johnr777]

Try this, but it doesn't work. They are active all the time...:

[CONDITION_...]
NAME = FLARE_FLICKERING
INPUT = FLAG_TYPE
LUT = (|13=1|)
FLASHING_FREQUENCY = 1
FLASHING_SMOOTHNESS = 0.9
FLASHING_SKIP_OFF_STATE = 1
FLASHING_NOISE_AMPLITUDE = 2
FLASHING_NOISE_BOUND = 10
FLASHING_NOISE_SPEED = 200
FLASHING_MIN_VALUE = 0.6
FLASHING_SYNCED = 0

Thats because your LUT line is incomplete. Example above is how you write a LUT line

 

[Ariel Suraniti]

Thats because your LUT line is incomplete. Example above is how you write a LUT line

Are you sure? What would the LUT be missing? Because I only want it to fire when the race is over. From what I see, the LUT should only contain 13=1 in its syntax. I don't understand what is missing.

 

[fughettaboutit]

a lut describes a range, if you only set one value in that range, what you think the values in the whole range are?
Use the goddamn lut
LUT = (|0=0|12=0|13=1|14=0|15=0|16=0|)

why would i write more than necessary?

 

[Ariel Suraniti]

a lut describes a range, if you only set one value in that range, what you think the values in the hole range are?
Use the goddamn lut
LUT = (|0=0|12=0|13=1|14=0|15=0|16=0|)

why would i write more than necessary?

Forgiveness. I didn't know. I thought that with only this value, it would fire at the end of the race. I am trying to understand how it works. I didn't want to bother you, or that you have to write more. Thanks for your help.

 

[fughettaboutit]

Forgiveness. I didn't know. I thought that with only this value, it would fire at the end of the race. I am trying to understand how it works. I didn't want to bother you, or that you have to write more. Thanks for your help.

Sorry for the damn , but this stuff is quite buggy still, so if it still wont work, dont waste more time on it.

 

[Ariel Suraniti]

Sorry for the damn , but this stuff is quite buggy still, so if it still wont work, dont waste more time on it.

No problem for the damm...
I tried the one you gave me and it doesn't work either. The smoke is lit from the beginning of the practice. It never goes off. I also tried other configurations that include a range and nothing. Unless the values 13 and 14 are changed. That 13 is the last round and 14 is the end of the session. Now I'm going to try it.

 

[fughettaboutit]

uff it might work different than i said, through INTENSITY, see Kicevo config
https://github.com/ac-custom-shaders-patch/acc-extension-config/blob/fff487acabee022a8844645c4d3fc6edaf1f9415/config/tracks/kicevo.ini

 

[Ariel Suraniti]

uff it might work different than i said, through INTENSITY, see Kicevo config
https://github.com/ac-custom-shaders-patch/acc-extension-config/blob/fff487acabee022a8844645c4d3fc6edaf1f9415/config/tracks/kicevo.ini
View attachment 7650

Yeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeees. Thx a lot !!!!!!!!
Here I leave the syntax. If I want to repeat it in several places, I would only have to add a comma in position, right?

[CONDITION_0]
NAME = SMOKE
INPUT = FLAG_TYPE
LUT = (|0=0|12=0|13=1|14=0|15=0|16=0|)
FLASHING_FREQUENCY = 1
FLASHING_SMOOTHNESS = 0.9
FLASHING_SKIP_OFF_STATE = 1
FLASHING_NOISE_AMPLITUDE = 2
FLASHING_NOISE_BOUND = 10
FLASHING_NOISE_SPEED = 200
FLASHING_MIN_VALUE = 0.6
FLASHING_SYNCED = 0
[SMOKE_0]
POSITION = -44.64, 0, -219.68
DIRECTION = 0, 1, 0
SPEED = 20
SIZE = 0.1
COLOR = 255, 0, 0, 1
INTENSITY = 1
SPREAD = 8
INTENSITY = SMOKE
[SPARKS_0]
POSITION = -44.64, 0, -219.68
DIRECTION = 0, 1, 0
SPEED = 12
LIFE = 0.3
COLOR = 255, 0, 0, 0.4
INTENSITY = 1
SPREAD_DIR = 2
SPREAD_POS = 0
INTENSITY = SMOKE
[LIGHT_0]
POSITION = -44.64, 0, -219.68
DIRECTION = 0, 1, 0
CONDITION = FLARE_FLICKERING
SPOT = 0
DIFFUSE_CONCENTRATION = 1
RANGE = 12
RANGE_GRADIENT_OFFSET = 0.0
COLOR = 255, 0, 0, 0.1

 

[fughettaboutit]

so now i could try it too, anything with FLAG_TYPE doesnt seem to work, goddamn it @x4fab/Ilja!
https://github.com/ac-custom-shaders-patch/acc-extension-config/issues/280

 

[fughettaboutit]

On this old version of CSP it works, not the 14=1 though!
(hint: use default weatherFX controller- and weather-script)

 

[fughettaboutit]

Here I leave the syntax. If I want to repeat it in several places, I would only have to add a comma in position, right?

make sure you only have one INTENSITY line per section!

 

[Ariel Suraniti]

so now i could try it too, anything with FLAG_TYPE doesnt seem to work, goddamn it @x4fab/Ilja!
https://github.com/ac-custom-shaders-patch/acc-extension-config/issues/280

On this old version of CSP it works, not the 14=1 though!
(hint: use default weatherFX controller- and weather-script)
View attachment 7651

I have 0.1.79-preview5 and work !!!

make sure you only have one INTENSITY line per section!
View attachment 7652

Ok.

 

[fughettaboutit]

"I have 0.1.79-preview5 and work !!!"

oh ok, then one more damn too much