How can I create video screen

[quetillo]

I have tried to create a video screen for a track, I wanted to make a screen that would broadcast the tracking of the car, I have seen a circuit,sachsenring,and I have seen that the cameras retransmit when it happens, I have tried by placing the parameters the same but changing the meshes and materials, as well as the positions, but they still do not come out. I don't know if I have to put something in kseditor. Someone knows something on this topic, thank you

 

[Johnr777]

I have tried to create a video screen for a track, I wanted to make a screen that would broadcast the tracking of the car, I have seen a circuit,sachsenring,and I have seen that the cameras retransmit when it happens, I have tried by placing the parameters the same but changing the meshes and materials, as well as the positions, but they still do not come out. I don't know if I have to put something in kseditor. Someone knows something on this topic, thank you

Tracks – Displays · ac-custom-shaders-patch/acc-extension-config Wiki · GitHub

 

[quetillo]

I did so and I did not get anything. I do not know if in kseditor I have to put any ks or parameters.

 

[quetillo]

[DISPLAY_...]
; General settings:
MESHES = tvstaff_HI_?------here I put the name of the mesh, in my case it is the mesh of the object that I made, an advertising poster, which has mesh and texture on the front, I made a straight line with RTB and exported it to the kseditor to go testing, I sent it to the assetto and there is look for the mesh and the texture and in congi place those parameters, also create the AI and place cameras, if necessary, but nothing at all , the screens do not make or mention anything

 

[Johnr777]

[DISPLAY_...]
; General settings:
MESHES = tvstaff_HI_?------here I put the name of the mesh, in my case it is the mesh of the object that I made, an advertising poster, which has mesh and texture on the front, I made a straight line with RTB and exported it to the kseditor to go testing, I sent it to the assetto and there is look for the mesh and the texture and in congi place those parameters, also create the AI and place cameras, if necessary, but nothing at all , the screens do not make or mention anything

You obviously didn’t read the WIKI page…

this is very important:

REGION_START = 20, 320   ; display position on texture, in pixels
REGION_SIZE = 508, 290   ; display size on texture, in pixels

Need to get the values for your object, using object inspector

 

[quetillo]

Yes, I did put everything, but I can't understand what it is for.

 

[Johnr777]

I give up….

 

[quetillo]

It is a pity that we do not have a video for these things, because even with the translator it is difficult for me

 

[quetillo]

REGION_START = 0, 0
REGION_SIZE = 1024, 512

 

[quetillo]

CAMERA_0 = 53.886 ,34.671 ,79.482
CAMERA_0_TARGET = CLOSEST_CAR ; instead of fixed point, uses closes car
CAMERA_0_TARGET_INERTIA = 0.1 ; camera inertia for smoother movement
CAMERA_0_FOV = 15
And this is where I put the coordinates, inside AC where the camera would be.