there is a part of my AI spline boundaries thats missing

[EPIKZIMBAWE]

well, first sorry for my bad english, i need help with my track, there is a part of the red line that tell the ai where is the circuit thats missing, i allready tried ai line helper, changing grass to dont be part of the track and i did again the ai spline too, but nothing worked. i hope you guys can help me,

as you can see by the skidmarks they all crash there

 

[fughettaboutit]

(your pic didnt upload)

In some banked corners, the ai borders can be hidden, they are still there, under the road

For AI to also drive slow/tight corners well, use
data\ai_hints.ini

 

[EPIKZIMBAWE]

(your pic didnt upload)

In some banked corners, the ai borders can be hidden, they are still there, under the road

For AI to also drive slow/tight corners well, use
data\ai_hints.ini

Im new at this, this is my first track and I dont understand much about it, can you fix it? I already tried ai hints and it didnt work for me... i let you the files here.
(the error its in the main straight just before the start/finish line)

https://www.mediafire.com/file/vsgbs2kaneiu77v/autodromo_dos_caminos_2023.rar/file

 

[fughettaboutit]

you somehow made a mistake when recording the fastlane.ai ...
you should finish the lap, in fact you should drive at least 2 laps, or "fast_lane.ai" might get screwed ...

and "pit_lane.ai" should be smaller than "fast_lane.ai"

https://assettocorsamods.net/threads/red-line-track.1806/#post-13007

 

[fughettaboutit]

and remove those "...payload.bin" files in ai folder

another thing: disable those two options:

 

[fughettaboutit]

so the process is, in ksEditor
1. load your track/road
2.load "fast_lane.ai"

(Optional: do a resample with 12

)
Save it with ksEditor

Check in AC, works!
then used the Blender addon to import fast_lane.ai
edited borders, export them to
data\side_l.csv
data\side_r.csv
then start AC and new borders get imported

also record new pitlane
working fine now (google drive link, only ai-lines and borders, unpack to track folder)

 

[EPIKZIMBAWE]

so i loaded your fast_lane.ai in ksEditor (with your track/road loaded too)
View attachment 8368
did a resample with 12
View attachment 8369
then saved it with ksEditor, checked in AC, works fine
then used the Blender addon to import fast_lane.ai
edited borders, exported them to
data\side_l.csv
data\side_r.csv
then started AC and new borders got imported
also recorded new pitlane
working fine now (google drive link, only ai-lines and borders, unpack to track folder)

I love you, so I do the same with the other variants of the circuit?

 

[EPIKZIMBAWE]

In the other variant is even worse. Can u Tell me how to use the blender tool, the tutorials are not very clear (or I dont understand them) and the ai line helper is not useful for me, my pc just crashes when i try to save the .csv file

 

[fughettaboutit]

just import AI line:

then in edit mode - you can move vertices around, to where you want them, the build-in addon "LoopTools" is quite usefull for that , when enabled, select some verts in edit mode, hit "W" -> Looptools -> i.e. Relax (options: 2 modes/amount) )

also using proportional editing helps a lot

when done, just export sides to "data\side_l.csv" and "data\side_r.csv" , one by one:
(export in object mode!)


edit: only edit/select small parts at one time, dont try to smooth the whole thing at once

 

[EPIKZIMBAWE]

simplemente importe la línea AI:
[ADJUNTAR]8376[/ADJUNTAR]
luego, en el modo de edición, puede mover los vértices a donde desee, el complemento integrado "LoopTools" es bastante útil para ese View attachment 8377, cuando esté habilitado, seleccione algunos verts en el modo de edición, presione "W" -> Looptools -> ie Relax (opciones: 2 modos/cantidad) View attachment 8379)

también usar la edición proporcional ayuda mucho View attachment 8381

Cuando haya terminado, simplemente exporte los lados a "data\side_l.csv" y "data\side_r.csv", uno por uno:
(¡exportar en modo objeto!)
[ADJUNTAR]8378[/ADJUNTAR]

editar: solo edite/seleccione partes pequeñas a la vez, no intente suavizar todo a la vez

I Dont Know why but I dont see the Fast line.ai when i export it to blender

 

[fughettaboutit]

I Dont Know why but I dont see the Fast line.ai when i export it to blender

import with scale 0.01
or zoom out a lot

 

[EPIKZIMBAWE]

import with scale 0.01
or zoom out a lot

That worked well, but how do you get that near to the ai line? i cant, the zoom stops far away from it

 

[fughettaboutit]

new try:
if you have to zoom out a lot, then import with scale 0.01

 

[EPIKZIMBAWE]

new try:
if you have to zoom out a lot, then import with scale 0.01

That Worked, Thank you so much, it helped me a lot

 

[Alex13111]

Hello everyone. Is it possible to export from the file groveline.csv or from fast_lane.ai to .kn5 and add a groove to the track? Thank you.

 

[fughettaboutit]

Hello everyone. Is it possible to export from the file groveline.csv or from fast_lane.ai to .kn5 and add a groove to the track? Thank you.

so i guess you found the right thread?

 

[Alex13111]

so i guess you found the right thread?
View attachment 8421

Yes, thank you!
I did not immediately see the necessary information.
I'm just getting to know Blender, and I didn't understand everything right away. But now, little by little, I understand.